Grover Jackson 1994 Randy Rhoads Professional

This is a Japanese-made “Randy Rhoads Professional” model dates from the era of the large logo.

Its unique, asymmetrical, V-shaped body features a poplar wing through-neck construction, along with specifications typical of the signature model, such as shark fin inlays, gold hardware and a V-plate routed through the back.

There are numerous dents and scratches visible across the entire body, including dents accompanied by paint damage at the tip of the headstock and on the corners of the body, as well as signs of tarnish on the metal parts.

There are no dents in the frets, and approximately 80% of the frets remain intact. The neck shows slight twisting, but this is within acceptable limits for standard setup, and the truss rod functions properly.

Appearance: Shows signs of use
Frets: Over 80% remaining overall
Neck Condition: Slightly twisted
Truss Rod: Works well
Replaced Parts: None
Repair/Modification History: None

Body Material: Poplar
Neck Material: Maple
Fingerboard Material: Ebony
Fingerboard: 12?16R Compound
Frets: Jumbo (22 frets)
Nut Width: 43.7 mm
Neck Profile: 1st Fret: 19.5 mm / 12th Fret: 21.4 mm
Neck Joint: Through-neck
Neck Scale: 25.5 inches (long scale)
Pickups: DJ-50N (neck), Dimarzio DP160 (bridge / replaced)
Controls: 2 Volume / 1 Tone / 3-way pickup selector
Tuners: Original
Weight: 3.46 kg

Case: Original hard case