Gibson 1967 ES-175D

This is a 1967 'ES-175D', a classic model from Gibson's range of full acoustic guitars.

Its one-piece mahogany neck with a narrow nut width is a specification unique to this era of guitars.

The following parts have been replaced, and the guitar's repair history is as follows:

Replaced parts:
- Pickups (details unknown; the neck and bridge pickups appears to be different)
- Knobs
- Bridge
- Pickup rings (the bridge is a Dimarzio, but the front is unknown).
- Nut
- Tuning pegs
- strap pins

Repair history:
- The tuning peg posts have been reamed to a larger diameter.
- Body side crack (jack side) glued and retouched.

The original frets show some wear, but there is currently no buzzing or other issues and the guitar plays well.

Appearance: Standard for its age
Frets: Dents primarily on the low frets of strings 1?3; approximately 50?60% of the frets are intact
Neck Condition: No issues
Truss Rod: Functions properly
Replaced Parts: See above
Repair/Modification History: See above

Body Material: Laminated Maple
Neck Material: Mahogany
Fingerboard Material: Rosewood
Fingerboard: 12R
Frets: Medium (20 frets)
Nut Width: 40.0 mm
Neck Shape: “C” (1st Fret: 20.8 mm / 10th Fret: 24.3 mm)
Neck Joint: Set-neck
Neck Scale: 24.75 inches (medium scale)
Pickups: Details unknown
Controls: 2 Volume / 2 Tone / 3-way pickup selector
Tuners: Rotomatic-type
Weight: 2.91 kg

Case: YAMAHA hard case