Gibson 1975 Les Paul Custom

This is a 1975 “Les Paul Custom” model features a three-piece maple neck and a pancake-style body.

It is in “player’s condition,” having undergone numerous repairs, modifications and replacement parts.

[Repair and modification History]
- Repair of adhesive failure on the neck joint
- Repair of adhesive failure on the fingerboard
- Repair of adhesive failure at the neck joint
- Repair of adhesive failure on the body side (pancake section)
- Repair of cracks in the fingerboard
- Multiple screw holes and some fill marks under the pickup rings

[Replacements]
- Re-fret
- Re-nut with oil-treated cow bone)
- Pickups (neck : Gibson 490T, rear : Gibson 498T)
- Tuner replacement (Gibson-engraved Schaller M6; original holes remain)
- Plastic parts (knobs, pickguard, pickup rings, toggle switch tips and switch plate)
- Capacitor
- Potentiometers
- Bridge and tailpiece (including studs) replaced with domestic parts

There are no issues with the frets, nut or neck condition that affect playability.

Appearance: Shows signs of use
Frets: Approximately 70% remaining intact
Neck Condition: No issues
Truss Rod: Functions properly
Replaced Parts: None
Repair/Modification History: None
Body Wood: Mahogany / Maple / Mahogany (Pancake)
Neck Wood: 3-Piece Maple
Fingerboard Material: Ebony
Fingerboard Radius: 12R
Frets: Medium Jumbo (22 frets / re-fretted)
Nut width: 42.7 mm
Neck shape: “C” (1st fret: 19.7 mm / 12th fret: 24.8 mm)
Neck Joint: Set-in neck
Neck Scale: 24.75 inches (medium scale)
Pickups: Front 490T, Rear 498T
Controls: 2 Volume / 2 Tone / 3-way pickup selector
Tuners: Gibson-engraved Schaller M6
Weight: 4.52 kg

Case: Original hard case (handle damaged)